An Efficient and Stable MoS2/Zn0.5Cd0.5S Nanocatalyst for Photocatalytic Hydrogen Evolution

Photocatalytic hydrogen evolution by water splitting is highly important for the application of hydrogen energy and the replacement of fossil fuel by solar energy, which needs the development of efficient catalysts with long-term catalytic stability under light irradiation in aqueous solution. Herein, Zn_0.5Cd_0.5S solid solution was synthesized by a metal–organic framework-templated strategy and then loaded with MoS₂ by a hydrothermal method to fabricate a MoS₂/Zn_0.5Cd_0.5S heterojunction for photocatalytic hydrogen evolution. The composition of MoS₂/Zn_0.5Cd_0.5S was fine-tuned to obtain the optimized 5 wt % MoS₂/Zn_0.5Cd_0.5S heterojunction, which showed a superior hydrogen evolution rate of 23.80 mmol h⁻¹ g⁻¹ and steady photocatalytic stability over 25 h. The photocatalytic performance is due to the appropriate composition and the formation of an intimate interface between MoS₂ and Zn_0.5Cd_0.5S, which endows the photocatalyst with high light-harvesting ability and effective separation of photogenerated carriers.     

Etched ZIF-8 as a Filler in Mixed-Matrix Membranes for Enhanced CO2/N2 Separation

Zeolite ZIF-8 has been etched with acid to form microporous ZIF-8-E crystals. These were then introduced into a polyethersulfone (PES) membrane matrix to enhance its CO₂/N₂ separation performance. Open through pores of size about 100 nm formed in the ZIF-8 crystals allow the ingrowth of polyethersulfone chains, ensuring a reduction in the number of nonselective voids, thereby achieving better interaction between ZIF-8-E and PES. As a result, the CO₂/N₂ separation performance of the ZIF-8-E/PES membrane increased significantly, showing a CO₂ permeability of 15.7 Barrer and a CO₂/N₂ ideal selectivity of 6.5.     

Trifluorosulfonylation Cascade in Allenols: Stereocontrolled Synthesis of Bis(triflyl)enones

Herein, we report investigations embodying the first example of reversal of the native regioselectivity in the reaction of allenols with electrophiles. The effortlessness of C−C bond formation, mild reaction conditions, neither catalysts nor light irradiation, and exquisite selectivity, both in terms of functional-group tolerance and chemo-, site-, and stereo-selectivity, converts this trifluorosulfonylation-rearrangement sequence into an appealing protocol for the preparation of novel functionalized enones. The synthetic utility of this method has been validated by the conversion of the initially prepared bis(triflyl)enones into a variety of bis(triflyl)-functionalized molecules such as 1,3-dienes, allylic alcohols, pyrroles, pyrazoles, and chromenes. Besides, DFT calculations have provided a reliable understanding of observed selectivity.     

Three-Component Reaction for the Synthesis of Highly Functionalized Propargyl Ethers

Multicomponent reactions provide efficient means to access molecular complexity. Herein, we report a copper-catalyzed three-component reaction of diazo compounds, alcohols and ethynyl benziodoxole (EBX) reagents for the synthesis of propargyl ethers. Extensive variations of the three partners of the reaction is possible, leading to highly functionalized and structurally diverse products under mild conditions. Alkynylation of a copper ylide intermediate is postulated as key step for this transformation.     

Conformational Studies of Oligosaccharides

The conformation of a molecule strongly affects its function, as demonstrated for peptides and nucleic acids. This correlation is much less established for carbohydrates, the most abundant organic materials in nature. Recent advances in synthetic and analytical techniques have enabled the study of carbohydrates at the molecular level. Recurrent structural features were identified as responsible for particular biological activities or material properties. In this Minireview, recent achievements in the structural characterization of carbohydrates, enabled by systematic studies of chemically defined oligosaccharides, are discussed. These findings can guide the development of more potent glycomimetics. Synthetic carbohydrate materials by design can be envisioned.     

Recent Advances in Iodine-Promoted C−S/N−S Bonds Formation

Sulfur-containing scaffold, as a ubiquitous structural motif, has been frequently used in natural products, bioactive chemicals and pharmaceuticals, particularly C−S/N−S bonds are indispensable in many biological important compounds and pharmaceuticals. Development of mild and general methods for C−S/N−S bonds formation has great significance in modern research. Iodine and its derivatives have been recognized as inexpensive, environmentally benign and easy-handled catalysts or reagents to promote the construction of C−S/N−S bonds under mild reaction conditions, with good regioselectivities and broad substrate scope. Especially based on this, several new strategies, such as oxidation relay strategy, have been greatly developed and accelerated the advancement of this field. This review focuses on recent advances in iodine and its derivatives promoted hybridized C−S/N−S bonds formation. The features and mechanisms of corresponding reactions are summarized and the results of some cases are compared with those of previous reports. In addition, the future of this domain is discussed.     

1,2,4,5-Tetrakis(tetramethylguanidino)-3,6-diethynyl-benzenes: Fluorescent Probes,Redox-Active Ligands and Strong Organic Electron Donors

In this work, the change of reactivity induced by the introduction of two para-ethynyl substituents (CCSi(iPr)₃ or CCH) to the organic electron-donor 1,2,4,5-tetrakis(tetramethylguanidino)-benzene is evaluated. The redox-properties and redox-state dependent fluorescence are evaluated, and dinuclear Cu^I and Cu^II complexes synthesized. The Lewis-acidic B(C₆F₅)₃ substitutes the proton of the ethynyl −CCH groups to give new anionic −CCB(C₆F₅)₃⁻ substituents, leading eventually to a novel dianionic strong electron donor in its diprotonated form. Its two-electron oxidation with dioxygen in the presence of a copper catalyst yields the first redox-active guanidine that is neutral (instead of cationic) in its oxidized form.     

Mechanism of Iodine(III)-Promoted Oxidative Dearomatizing Hydroxylation of Phenols: Evidence for a Radical-Chain Pathway

The oxidative dearomatization of phenols with the addition of nucleophiles to the aromatic ring induced by hypervalent iodine(III) reagents and catalysts has emerged as a highly useful synthetic approach. However, experimental mechanistic studies of this important process have been extremely scarce. In this report, we describe systematic investigations of the dearomatizing hydroxylation of phenols using an array of experimental techniques. Kinetics, EPR spectroscopy, and reactions with radical probes demonstrate that the transformation proceeds by a radical-chain mechanism, with a phenoxyl radical being the key chain-carrying intermediate. Moreover, UV and NMR spectroscopy, high-resolution mass spectrometry, and cyclic voltammetry show that before reacting with the phenoxyl radical, the water molecule becomes activated by the interaction with the iodine(III) center, causing the Umpolung of this formally nucleophilic substrate. The radical-chain mechanism allows the rationalization of all existing observations regarding the iodine(III)-promoted oxidative dearomatization of phenols.     

Stabilizing DNAzymes through Encapsulation in a Metal–Organic Framework

DNAzymes are a promising class of bioinspired catalyst; however, their structural instability limits their potential. Herein, a method to stabilize DNAzymes by encapsulating them in a metal–organic framework (MOF) host is reported. This biomimetic mineralization process makes DNAzymes active under a wider range of conditions. The concept is demonstrated by encapsulating hemin-G-quadruplex (Hemin-G4) into zeolitic imidazolate framework-90 (ZIF-90), which indeed increases the DNAzyme's structural stability. The stabilized DNAzymes show activities in the presence of Exonuclease I, organic solvents, or high temperature. Owing to its elevated stability and heterogeneous nature, it is possible to perform catalysis under continuous-flow conditions, and the DNAzyme can be reactivated in situ by introducing K⁺. Moreover, it is found that the encapsulated DNAzyme maintains its high enantiomer selectivity, demonstrated by the sulfoxidation of thioanisole to (S)-methyl phenyl sulfoxide. This concept of stabilizing DNAzymes expands their potential application in chemical industry.     

Growth of ZIF-8 MOF Films with Tunable Porosity by using Poly (1-vinylimidazole) Brushes as 3D Primers

This work reports on a novel and versatile approach to control the structure of metal–organic framework (MOFs) films by using polymeric brushes as 3D primers, suitable for triggering heterogeneous MOF nucleation. As a proof-of-concept, this work explores the use of poly(1-vinylimidazole) brushes primer obtained via surface-initiated atom transfer radical polymerization (SI-ATRP) for the synthesis of Zn-based ZIF-8 MOF films. By modifying the grafting density of the brushes, smooth porous films were obtained featuring inherently hydrophobic microporosity arising from ZIF-8 structure, and an additional constructional interparticle mesoporosity, which can be employed for differential adsorption of targeted adsorbates. It was found that the grafting density modulates the constructional porosity of the films obtained; higher grafting densities result in more compact structures, while lower grafting density generates increasingly inhomogeneous films with a higher proportion of interparticle constructional porosity.